MENU
CO
NOWEGO?
O FIRMIE
KONTAKT
PRODUKTY
SOFTWARE
MAPA STRON
|
 |
 |
 |

Automat MP2000 zgodnie z linją ze wszystkimi produktami Tompsona ,
skonstruowany został z przeznaczeniem do pracy w wymagających i ciężkich warunkach
przemysłowych. Podstawowe komponenty automatu MP2000 wykonano z łatwo dostępnych i
łatwo wymienialnych modułów , w celu zagwarantowania wysokiej wydajności ,
elestyczności oraz szybkiego i taniego serwisu.
Automat MP2000 przeznaczony jest do pracy bezpośrednio w przemysłowych linjach
prdukcyjnych, wymagających szybiego wydruku i automatycznej aplikacji etykiet na produkty
jednocześnie.Aplkator dmuchawka, drukarka termiczna oraz duży
zasobnik etykiet zamontowane są na regulowanym statywie , ze stali nierdzewnej, co
ułatwia zintegrowanie automatu ptaktycznie przy każdej linii produkcyjnej.
Automat MP2000 jest łatwy do zaprogramowania i może pracować jako
niezalezne urządzenie przy użyciu alfanumerycznego terminala firmy Tompson.
MP 2000 może również być podłączony do systemów komputerowych ,
umozliwiając w ten sposób całkowitą kontrolę informacji drukowanej i aplikowanej na
produktach. Masywne wykonanie MP2000 powoduje, że jest jednym z najwydatniejszych
automatów drukująco-aplikujących etykiety na rynku. |
|
 |

ZOBATRZ VIDEO
|
 |
|
 |
 |
Media specifications
- Direct thermal & thermal transfer self-adhesive labels.
- Roll diameter: outer 350mm, inner core 76 mm.
Label format:
- maximum length:120 mm
- minimum length:50 mm
- maximum width:120 mm
- minimum width: 50 mm
Note: To get the best result, the length of the label should not be
less than 0.5 x the width.
Application specification
- Product sensing: photo cell
- Application type: side - left, right and top
- Application distance: 30-150 mm
Capacity:
- Max. capacity: Label size 50x50 mm: 50 labels/min
- Max. capacity: Label size 120x120 mm: 30 labels/min
Interface specification
- RS232 9-pole keyboard/ computer interface
Options
- Alpha numeric keyboard
- Visual paper low alarm
- Stand
Physical dimensions
Printer and applicator:
- Length: 395 mm
- Width: 242 mm
- Height: 136 mm
- Weight: 9kg
Printer, applicator, label roll module and stand:
- Length 650 mm
- Depth: 750 mm
- Height: 1300mm
- Weight: 50kg
Electrical specification
- Power requirements: 220/240 Volts, 1 amp, 50 Hz
- Meets the requirements of the harmonized standards related to the EMC
directive.
Operating environment
- Operating temperature -5° to +40°
- 20% to 85% non-condensing relative humidity
- Air requirements: 100 l/min clean, dry, oil free at 5 bar.
Function and operation
- On-line or stand-alone operation
- ASCII-programmable data communication
- RS232 data communication interface
- Easily exchangeable modules
- High availability
|

MENU CO NOWEGO ? O FIRMIE PRODUKTY
KONTAKT SOFTWARE
MAPA STRON
Copyright Š 1998 TOMPSON. Last updated 06/11/1998. By using this site, you
agree to respect our trademarks and site usage terms and conditions.
Please contact us with questions or product sales inquiries.
|
|