Application specification
Types
- Application control via relays
- Apply distance: 150 - 800mm (5.9" - 31.5")
- Height adjustment: 600mm (23.6")
- Cycle time: 12 sec per two sides labelling
Media
Types
- Die cut self-adhesive labels
- Direct thermal or thermal transfer types
- Fan folded or on roll
Dimensions
- Label format: 148 x 210 mm (DIN A5)
Printing specification
- Resolution: 8 dots per mm (200DPI)
- Maximum print width: 160mm (6,3")
- Print speed: 100mm (3.9") per second
Communication interface
Dimensions
- Serial RS232C, 9-pole female connector
Optional second interface: (planned)
- Ethernet: TCP/IP
- Parallel interface (Centronics)
For serial interfaces:
For serial interfaces: 9600 - 19200 baud,
7 - 8 bits data length, 1 - 2 stop bits,
parity XON-XOFF or RTS-CTS protocol
Fonts
6 standard fonts expandable 1 - 16 times in height and width
- Programmable character density
- Font sizes 7 - 42 dots, 3 scaleable fonts 1 - 64 points
Barcodes
- Code 39
- Codabar
- Code 128
- 2 of 5 interleaved
- EAN 8, EAN 13,
- EAN 128,UPC-E
- ITF 14/DUN 14
- Code 93
- USD-5 dot code
- PDF 417
- LEB code
Function and operation
- On line or stand alone operation
- ASCII programmable data communication.
- RS232 data communication interface
- Exchangeable modules
Options
- Moveable stand
- Motorised height adjustment
- Bar code verifier
Electrical specification
- Moveable stand
- Motorised height adjustment
- Bar code verifier
Graphics
- Power requirements: 220/240 Volts, 2 amp. 50Hz
- Meets the requirements of the harmonised standards related to the EMC directive
- The MP6000 is CE-marked
Compressed air requirements
- 200 litre per minute (continuos operation) clean, dry, oil free at 6 bar
Operating environment
- Temperature: +5 to +40°C
- 20% to 85% non-condensing relative humidity
Physical dimensions
- Length: 700mm (27.6")
- Width: 670mm (26.4")
- Height: 1500mm (59")
- Weight: 90 kg (without foot stand)
|
MP6000
